Endless potentiometer

Endless Button

button_number

• shortname: bnu
• How: self:button_number() or self:button_number(number)
  • number: signed integer
• What: This function when given no parameter, returns the # number of the control element. These numbers are from the top left, read left to right, top to bottom 0 to 15 OR in the case of the TEK2 from 0 to 7. When this function is given a parameter, it will set the # number of the control element to the number given.
• Example:

button_value

• shortname: bva
• How: self:button_value() or self:button_value(value)
  • value: integer, ranging 0...127
• What: This function returns the value associated to the button. By default, this value is 127 when the button is pressed down and 0 when released. When this function is given a parameter, it will set the value associated with the button state according to the parameter given. When using other types of button modes, described later in this chapter, the button values are evenly spread across the steps: eg. spilt 3 was would be values 0 63 127 split 4-way would be 0 47 95 and 127.
• Example: Inputting the code self:button_value(127) will make all button press and button release event return the value 127.

button_min

• shortname: bmi
• How: self:button_min() or self:button_min(value)
  • value: integer, ranging 0...127
• What: This function returns the minimum value of the "released" button state. This is 0 by default. When given a parameter, this function changes the minimum value of the button state according to the value given as parameter.
• Example: The code self:button_min(20) will set the value of the button to 20 when released.

button_max

• shortname: bma
• How: self:button_max() or self:button_max(value)
  • value: integer, ranging 0...127
• What: This function returns the maximum value of the "pressed down" button state. This is 127 by default. When given a parameter, this function changes the maximum value of the button state according to the value given as parameter.
• Example: The code self:button_max(110) will set the value of the button to 110 when pressed down. This can be useful to set easy to use values for a switch, like self:button_max(1) will make it so that there are only two values this button can send out 0 and 1.

button_mode

• shortname: bmo
• How: self:button_mode() or self:button_mode(mode)
  • mode: integer, ranging 0...127
• What: This function returns the value of the button mode. This is 0 by default. Button mode means how many 'steps' the button has between its maximum and minimum value. For example when the function is used to set this value like this: self:button_mode(mode) the resolution parameter will govern the number of steps.
• Example: The code self:button_mode(2) will make the button a 3-step switch. The three states will be 0 , 63 and 127.

button_elapsed_time

• shortname: bel
• How: self:button_elapsed_time()
• What: This function returns the time elapsed since the last trigger in frames.
• Example:

button_state

• shortname: bst
• How: self:button_state()
• What: This function will return the "state" of the control element. In case of a button this is either "pressed down" 127 OR "released" 0. These values independent from value variable of the control element. This means that the button_state() function will always return the values associated with the "pressed" or "released" states, independently from any kind of alterations to the button value functions, such as changing the max or min values.
• Example:

Endless Rotation

endless_number

• shortname:
• How: self:endless_number() or self:endless_number(number)
  • number: signed integer
• What: This function, when given no parameter, returns the # number of the control element. These numbers are from the top left, read left to right 8 to 9. When this function is given a parameter, it will set the # number of the control element to the number given.
• Example:

endless_value

• shortname:
• How: self:endless_value() or self:endless_value(value)
  • value: integer, ranging 0...16383
• What: This function returns the value of the endless state. By default, this value is 0 when the endless is turned and tops out at 16383. When this function is given a parameter, it will set the value associated with the endless state according to the parameter given and will output that value on each trigger.
• Example:

endless_min

• shortname:
• How: self:endless_min() or self:endless_min(value)
  • value: integer, ranging 0...127
• What: This function returns the minimum value configured to the endless minimum state. This is 0 by default. When given a parameter, this function changes the minimum value of the endless state according to the value given as parameter.
• Example: The code self:endless_min(20) will set the starting value of the endless potentiometer to 20 when rotated.

endless_max

• shortname:
• How: self:endless_max() or self:endless_max(value)
  • value: integer, ranging 0...16383
• What: This function returns the maximum value configured to the endless maximum state. This is 16383 by default. When given a parameter, this function changes the maximum value of the endless state according to the value given as parameter.
• Example: The code self:endless_max(110) will set the end value of the endless potentiometer to 110 when turned.

endless_mode

• shortname:
• How: self:endless_mode() or self:endless_mode(mode)
  • resolution: integer, ranging 0...1
• What: This function returns the value of the endless mode. This is 0 or "absolute mode" by default.
  When function is given 1 as a value, it will change the endless potentiometer to "relative mode binary offset". In this mode turning the endless 'backwards' or counterclockwise will always result in the value 8146 and turning it 'forwards' or clockwise will always result in the value 8247 .
  When the function is given 2 as a value and self:endless_max(127), it will change the endless potentiometer to "relative mode 2's comp". In this mode turning the endless potentiometer 'backwards' or counterclockwise will always result in the value 127 and turning it 'forwards' or clockwise will always result in the value 1 .
• Example: The code self:endless_mode(1) will change the endless potentiometer into relative mode.

Relative mode users!

When using either relative mode, setting the endless potentiometer to a 7bit by setting its maximum value with self:endless_max(127) is recommended.

endless_senitivity

• How: self:endless_senitivity() or self:endless_senitivity(senitivity)
• What: Returns the value of the endless sensitivity, which is 100 by default. When given a value for the sensitivity parameter, it changes the sensitivity of the endless potentiometer. It adjusts how much rotation is needed to send out a value; a lower number means more rotation is required to send the value.
• Example: Set the sensitivity to a new value self:endless_sensitivity(1) > Max amount of rotation to send out the value

endless_elapsed_time

• shortname:
• How: self:endless_elapsed_time()
• What: This function returns the time elapsed since the last trigger in frames.
• Example:

endless_state

• shortname: est
• How: self:endless_state()
• What: This function will return the "state" of the control element.
• Example: